High Performance Cutting Tools

SOLID CARBIDE BITS

FLUSH TRIM BITS 10
BEVEL TRIM BITS 10
FLUSH AND BEVEL TRIM BIT (DOUBLE ENDED) 10
DADO TRIM BITS 10
HOLE AND FLUSH TRIM BITS 10 
V-GROOVING BITS 10
FLUSH AND BEVEL TRIM BITS 11
RIP AND SLOTTING BITS 11
ROUND BOTTOM VEINING BITS (1 FLUTE) 11
ROUND BOTTOM VEINING BITS (2 FLUTE) 11
2 FLUTE UPCUT BALL NOSE 11
TAPPERED BALL NOSE – UPCUT 11
COVE NOSE SPIRAL BIT 12
FLAT BOTTOM VEINING BITS (2 FLUTE) 12
LINER BITS 12
ENGRAVING BITS 12
STRAIGHT BIT – 1 FLUTE (GENERAL PURPOSE APPLICATION) 12
STRAIGHT BIT – 2 FLUTE (GENERAL PURPOSE APPLICATION) 13
SOLID CARBIDE FIBERGLASS BITS 13
SOLID CARBIDE WOOD SCREW SLOT BITS 13
FLUSH TRIM BITS 14
2 FLUTE FLUSH TRIM DOWNCUT BIT 14
2 FLUTE FLUSH TRIM UPCUT BIT 14
2 FLUTE FLUSH TRIM COMPRESSION BIT 14
CHAMFER 2+2 COMPRESSION BITS 14

NEW SOLID CARBIDE MOAB-COATINGS
(Mother Of All Bits)

2+2 COMPRESSION MD SERIES MOAB-PLUS COATING 15
3+3 COMPRESSION MD SERIES MOAB-PLUS COATING 15
2+2 COMPRESSION HD SERIES MOAB-PLUS COATING 15
3+3 COMPRESSION HD SERIES MOAB-PLUS COATING 15
2 FLUTE SPIRAL DOWNCUT MD SERIES MOAB-PLUS COATING 16
2 FLUTE SPIRAL UPCUT MD SERIES MOAB-PLUS COATING 16

DIAMOND TIPPED BITS

DIAMOND-TIPPED ROUTER BITS • PCD (1+1 DESIGN) 16
DIAMOND-TIPPED T-SLOT BITS • PCD (2+1 DESIGN) 16
DIAMOND-TIPPED T-SLOT BITS • PCD (2+1 DESIGN) 16

SOLID CARBIDE PLASTIC BITS

O FLUTE STRAIGHT BIT – 1 FLUTE (POLISHED) 17
O FLUTE STRAIGHT BIT – 1 FLUTE (POLISHED) – LEFT-HAND 17
O FLUTE STRAIGHT BIT – 2 FLUTE (POLISHED) 17
O FLUTE ROUNDING EDGE STRAIGHT FLUTE – 1 FLUTE 18
O FLUTE ROUNDING EDGE STRAIGHT FLUTE – 2 FLUTE 18
O FLUTE ROUNDING EDGE SPIRAL BIT – 1 FLUTE 18
O FLUTE UPCUT BIT – 1 FLUTE (GENERAL PURPOSE) 18
O FLUTE DOWNCUT BIT – 1 FLUTE (GENERAL PURPOSE) 18
O FLUTE UPCUT – 1 FLUTE (REPLACED AS “SOU” SERIES) 19
O FLUTE UPCUT – 1 FLUTE (POLISHED) – HARD PLASTIC 19
O FLUTE DOWNCUT – 1 FLUTE (POLISHED) – HARD PLASTIC 19
O FLUTE UPCUT – 1 FLUTE (POLISHED) – SOFT PLASTIC 20
O FLUTE DOWNCUT – 1 FLUTE (POLISHED) – SOFT PLASTIC 20
O FLUTE LOW HELIX UPCUT SPIRAL, 2 FLUTE 20
O FLUTE HIGH HELIX UPCUT SPIRAL, 2 FLUTE 21
O FLUTE SLOW SPIRALS 21

SOLID CARBIDE SPIRAL BITS

2 FLUTE DOWNCUT BITS 22
2 FLUTE UPCUT BITS 23
2 FLUTE DOWNCUT BITS – MD 24
2 FLUTE DOWNCUT BITS – HD 24
2 FLUTE UPCUT BITS – MD 24
2 FLUTE UPCUT BITS – HD 24
2 FLUTE DOWNCUT LEFT-HAND 25
2 FLUTE UPCUT LEFT-HAND 25
2 FLUTE DOWNCUT BITS W/ CHIPBEAKERS 25
2 FLUTE UPCUT BITS W/ CHIPBEAKERS 26
3 FLUTE DOWNCUT BITS 26
3 FLUTE UPCUT BITS 26
3 FLUTE DOWNCUT SLOW SPIRAL BITS 27
3 FLUTE UPCUT SLOW SPIRAL BITS 27
3 FLUTE DOWNCUT BITS W/ CHIPBEAKERS 27
3 FLUTE UPCUT BITS W/ CHIPBEAKERS 28
3 FLUTE DOWNCUT ROUGHERS 28
3 FLUTE UPCUT ROUGHERS 28
3 FLUTE DOWNCUT SLOW SPIRAL ROUGHERS 29
3 FLUTE UPCUT SLOW SPIRAL ROUGHERS 29
1+1 COMPRESSION BITS 29
1+1 COMPRESSION – LEFT-HAND 29
2+2 COMPRESSIONS 30
2+2 COMPRESSIONS – MORTISE 30
2+2 COMPRESSIONS – MD 31
2+2 COMPRESSIONS – MD MORTISE 31
2+2 COMPRESSIONS – HD 31
2+2 COMPRESSIONS – LEFT-HAND 32
2+2 COMPRESSIONS W/ CHIPBREAKERS 32
3+3 COMPRESSIONS 32
3+3 COMPRESSIONS – MD 33
3+3 COMPRESSIONS – HD 33
4 FLUTE DOWNCUT FINISHNG/ROUGHER 33
4 FLUTE UPCUT FINISHING/ROUGHER 33
4+4 COMPRESSIONS 34
4+4 FINISHING/ROUGHER COMPRESSIONS 34

CARBIDE TIPPED STRAIGHT BITS

1 FLUTE STRAIGHT 34
2 FLUTE STRAIGHT 35
2 FLUTE STRAIGHT 36
2 FLUTE LEFT-HAND STRAIGHT 37
2 FLUTE STRAIGHT 3/4 SHANK 37
2 FLUTE MORTISE STRAIGHT 37
TEMPLATE STRAIGHT 37
TEMPLATE STRAIGHT WITH OVERSIZED BEARING 37
INSERT TEMPLATE STRAIGHT 38
STAGGERTOOTH STRAIGHT FLUTE 38
STAGGERTOOTH STRAIGHT OPPOSITE SHEAR 38
CENTER PILOT STAGGERTOOTH 38
PLUNGE PANEL PILOT – 1 FLUTE 39
PLUNGE PANEL PILOT – 2 FLUTE 39
PANEL PILOT – HSS – 1 FLUTE STRAIGHT 39
PANEL PILOT – HSS SPIRAL – 1 FLUTE 39
FLUSH TRIM (2 FLUTE) 39
FLUSH TRIM (3 FLUTE) 40
FLUSH TRIM DOUBLE BEARING 40
FLUSH TRIM V-GROOVE 40
OVERHANG 40
GLUE SPACE FLUSH TRIM 40
EASY EDGE (NO FILING) 41
DOWNSHEAR FLUSH TRIM 41
SCREW-ON MORTISE – INSERT 41
SCREW-ON MORTISE – ARBORS 41
SCREW-ON MORTISE – CARBIDE-TIPPED 42

CARBIDE TIPPED FORM BITS

BOWL AND TRAY 42
CORE BOX TEMPLATE 43
CORE BOX BITS 43
BALL END BITS 43
BULL NOSE BITS 44
PLUNGE HAND GRIP 44
OVAL EDGE (HALF-BULL NOSE) 44
V-GROOVE – 90º 44
V-GROOVE – 120º 45
V-GROOVE – 60º 45
POINT CUTTING ROUNDOVER 45
DOVETAIL 46
DOVETAIL BITS FOR DODDS® MACHINE 46
SOLID CARBIDE DOVETAIL BITS FOR DODDS® MACHINE 47
STAIR TREAD AND BOTTOM CLEANING 47
COVE BITS 47
RABBET BITS 47
RABBET BIT KITS 48
SLOTTING – 2 FLUTE 48
SMALL PILOT ROUNDOVER 48
ROUNDOVER BITS 49
BEADING BITS 50
BORING POINT ROUNDOVER 50
BORING POINT ROUNDOVER AND EDGE 50
DOUBLE ROUNDOVER 51
ROMAN OGEE 51
BEVEL/LAMINATE TRIM 51
CHAMFER – 45º 52
CHAMFER – 22-1/2º & 30º 52
KEYHOLE – 2 FLUTE 52
T-SLOT – SLAT WALL 52
SLOT AND UNDERCUT 53
EURO TRIM BITS 53
CLASSICAL COVE 53
WAVY EDGE 53
RADIUS EDGE 53
FULL BEAD 54
TRIPLE BEAD 54
TRIPLE FLUTE 54
DOUBLE ROUND 54
COVE AND BEAD 55
OGEE FILLET 55
OGEE BITS 55
CLASSICAL PATTERN 55
EDGE BEADING 56
VARIABLE BEADING 56
LARGE BEAD 56
BEAD AND COVE 56
MOLDING BITS 56
TAPER REED 57
TABLE EDGE 57
HANDRAIL BIT 57
SPECIALTY MOLDING 57
CLASSICAL MULITFORM 58
DRAWER LOCK 58
GLUE JOINT 58
45º LOCK MITER 58
LOCK MITER SET – 22.5º 58
WEDGE TONGUE AND GROOVE 59
EDGE BANDING SET 59
BEAUTY MOLDING 59
BEADED PICTURE FRAME MOLDING 59
CROWN MOLDING EDGE TRIM 59
ELLIPSE OGEE 60
FURNITURE/BOX MAKER 60
TONGUE AND GROOVE ASSEMBLY 60
FINGER JOINT ASSEMBLY 60
PLUNGE OGEE 61
CLASSICAL ROUND BOTTOM 61
DOOR EDGE PROFILE 61
MDF DOOR BITS 62
VERTICAL PANEL 62
RAISED PANEL BITS 62
MEDIUM RAISED PANEL 62
STILE AND RAIL 63
DOUBLE STILE AND RAIL 63
RECESSED DOOR EDGE 63
EUROPEAN DOOR EDGE 63
DRAWER PULL 64
WINDOW SILL EDGE 64
WINDOW SASH BIT 64
PICTURE FRAME 65
PASO ROBLES THROW AWAY 65
POCKET HOLE BITS FOR CASTLE™ MACHINE 66
EURO STEP BITS 66
QUEEN ANNE MOLDING 66
PLYWOOD KNOCKOUT 66

SOLID SURFACE BITS

FACE INLAY BITS 67
NO DRIP COUNTER TOP 67
UNDER ROUNDOVER 67
FLUSH TRIM BITS 68
OVERHANG BOWL TRIM 68
ROUNDOVER BITS WITH DELRIN BEARING 68
ROUNDOVER UNDERMOUNT 68
DOUBLE COVE BIT 69
ROMAN OGEE UNDERMOUNT 69
BEVEL UNDERMOUNT 69
WILSONART® BOWL 69
SOLID SURFACE REPAIR BITS 69
BEVEL BIT 70
VERTICAL NO DRIP 70
COUNTERTOP SURFACE PLANER 70
DRAINBOARD BITS 70
FACE COVE BITS 70
BACKSPLASH COVE 71
SOLID SURFACE REPAIR BITS 71

SLOT CUTTERS AND SAW BLADES

2 WING SLOT CUTTER 71
2 WING SLOT CUTTER – ASSEMBLY 71
3 WING SLOT CUTTER 72
3 WING SLOT CUTTER – ASSEMBLY 72
4 WING SLOT CUTTER 73
4 WING SLOT CUTTER – ASSEMBLY 73
3 WING COUNTERSINK SLOT CUTTER* 73
3 WING COUNTERSINK SLOT CUTTER – ASSEMBLY* 73
DRAWER SLOT CUTTERS 74
JEMCO SLOT CUTTERS 74
TOPMASTER SLOT CUTTER – 2 WING 74
TOPMASTER SLOT CUTTER – 3 WING 74
ADJUSTABLE SLOTTING CUTTER ASSEMBLY 75
CARBIDE-TIPPED SAW BLADES 75
CARBIDE TIPPED PLASTIC SAW (TRIPLE CHIP GRIND) 75
ARBORS FOR PLASTIC SAWS 75

ROUTER BIT ACCESSORIES

BEARINGS 76
DUST SHIELDS 76
RETAINING RINGS 77
BEARING LOCKING COLLARS 77
BEARING KITS 77
ARBORS FOR SLOT CUTTERS 77
ARBORS FOR COUNTERSINK SLOT CUTTERS (FLUSH BOTTOM) 78
Arbors For JEMCO® SLOT CUTTERS 78
SCREWS 78
SHIM/SPACER KIT (12 PIECE) 78
HEX KEY WRENCHES 78
STEEL ROUTER COLLETS 78
SOLID BRASS INLAY KIT 79
BRASS TEMPLATE GUIDE KIT 79
SQUARE CORNER CHISEL 79
CARBON STEEL ROUTER BLANKS* 79
HIGH SPEED STEEL ROUTER BLANKS FOR FINISHED GROUND 80
HOLLOW MORTISING CHISELS 80
HOLLOW MORTISING CHISELS – CENTER DRILL ONLY 80
HSS CARVING ROUGHER BITS 80
HSS ROUNDING CARVING BITS 81
HSS CARVING POD BITS 81

DOOR BITS

CARBIDE-TIPPED STRAIGHT DOOR LITE BITS 81
HIGH-SPEED STEEL SPIRAL DOOR BITS 81
CARBIDE INSERT DRILL BIT 81
CARBIDE TIPPED MULTI-SPUR BITS 82
HIGH SPEED STEEL MULTI-SPUR BITS 83
2 WING DOOR DRILLS – ECONOMY 83
3 WING DOOR DRILL BITS 84
3 WING QUICK CHANGE DOOR DRILLS 84
3 WING DOOR KNOB DRILLS 85
DOOR KNOB DRILLS 85
LATCH BORE BIT 85
LATCH BORE BIT WITH THREADED SHANK 85
CARBIDE TIPPED BRAD POINT TWIST DRILLS 85
FACE FRAME BITS 86

BRAD POINT AND THROUGH HOLE BITS

BRAD POINT – 57MM OAL 86
BRAD POINT – 70MM OAL 87
BRAD POINT – 77MM OAL 87
BRAD POINT – 63.5MM OAL WITH 1/4˝ SHANK 88
V-POINT – 58MM OAL 88
V POINT – 70MM OAL 89
V POINT – 77MM OAL 89
HINGE BITS – 57MM OAL 90
HINGE BITS – 70MM OAL 90
SOLID CARBIDE CENTER DRILLS WITH DRILL POINT 90
SOLID CARBIDE CENTER DRILLS WITH BRAD POINT 91
Drill Adapters 91
SOLID CARBIDE BORING BITS WITH STEEL SHANK –
BRAD POINT 91
SOLID CARBIDE BORING BITS WITH STEEL SHANK – V-POINT 91
CARBIDE-TIPPED THREADED SHANK DOWEL DRILLS 92
CHUCK ADAPTERS WITH THREADED SHANK 92
QUICK CHANGE ADAPTER – BIESSE® 93
CARBIDE-TIPPED COUNTERSINKS 93
CARBIDE-TIPPED COUNTERSINKS 93
CARBIDE-TIPPED COUNTERSINK – ADJUSTABLE 45º ANGLE 93
CARBIDE-TIPPED COUNTERBORES 93
QUICK CHANGE ADAPTER FOR METRIC DRILLS 93

DRILLS

ADJUSTABLE COUNTERBORE, STYLE NO. 5 94
ADJUSTABLE COUNTERBORE, STYLE NO. 5A 94
CARBIDE-TIPPED COUNTERBORE, STYLE NO. 5CT 94
CARBIDE-TIPPED COUNTERSINK, STYLE NO. 5CT 94
SHORT-LENGTH COUNTERSINKS, STYLE NO. 5C 94
ADJUSTABLE COUNTERSINK, STYLE NO. 5C 94
SOLID COUNTERBORE,
STYLE NO. 5DHS STEP DRILL • 1 PIECE 94
SOLID COUNTERSINK,
STYLE NO. 5EHS STEP DRILL • 1 PIECE 94
THREADED-SHANK ADJUSTABLE COUNTERBORE,
STYLE NO. 514 95
THREADED-SHANK ADJUSTABLE COUNTERSINK,
STYLE NO. 514C 95
CARBIDE-TIPPED ADJUSTABLE COUNTERBORE,
STYLE NO. 514CT 95
MORTISING BIT, STYLE NO. 6HS 95
2 Flute • Bi-Directional Cutting 95
VIBRATING MORTISE BIT,
STYLE NO. 46HS 2 Flute • Bi-Directional Cutting 95
THREADED-SHANK DRILL-POINT DRILL,
STYLE NO. 12HS • 90º Point For Woodworking 95
THREADED-SHANK BRAD-POINT DRILL,
STYLE 14, 14A, 14ACT 95
THREADED-SHANK BRAD-POINT DRILL, STYLE 14AHS 95
THREADED-SHANK BRAD-POINT DRILL, STYLE NO. 14BHS 95
CARBIDE-TIPPED THREADED-SHANK BRAD-POINT DRILLS,
STYLE NO. 14CT 95
Metric CARBIDE-TIPPED THREADED-SHANK BRAD-POINT
DRILLS, STYLE NO. 14CT 96
CARBIDE-TIPPED THREADED-SHANK (EXTENDED)
BRAD-POINT DRILLS, STYLE NO. 14ESCT 96
THREADED-SHANK (EXTENDED) BRAD-POINT DRILLS,
STYLE NO. 14ESHS 96
THREADED-SHANK (EXTENDED) BRAD-POINT DRILLS,
STYLE NO. 14ESHS-L 96
THREADED-SHANK BRAD-POINT DRILLS, STYLE NO. 14HS 96
THREADED-SHANK BRAD-POINT DRILLS, STYLE NO. 14HSL 96
THREADED-SHANK BRAD-POINT DRILLS, STYLE NO. 14R 96
CARBIDE-TIPPED ADJUSTABLE COUTNERSINK, STYLE 4CT 97
TAPER SHELL COUNTERSINK,
STYLE 4 97
COUNTERSINK DRILLS, STYLE 5B 97
BRAD-POINT DRILL, STYLE 5BLHS 97
COUNTERSINK BRAD-POINT DRILL, STYLE 5BPHS 97
COUNTERSINK BRAD-POINT DRILL, STYLE 5BPHS-LH 97
COUNTERSINK DRILL-POINT DRILL, STYLE 5HS 98
COUNTERSINK DRILL-POINT DRILL, STYLE 5HSLH 98
V-POINT COUNTERSINK DRILL, STYLE 5VHS 98
COUNTERSINK BRAD-POINT DRILL, STYLE 5-7BPHS 98
DRILL-POINT DRILL, STYLE 5-7HS 98
COUNTERSINK BRAD-POINT DRILL, STYLE 5-8BPHS 98
DRILL-POINT DRILL, STYLE 5-8HS 98
BRAD-POINT DRILL, STYLE 8BPHS 98
BRAD-POINT DRILL, STYLE 8BPHSLH 99
STRAIGHT SHANK BRAD-POINT DRILL, STYLE 13 99
BRAD-POINT DRILL, STYLE 13B 99
CARBIDE-TIPPED COUNTERSINK,
STYLE 8CT – 82º 99
DRILL-POINT DRILL, STYLE 8HS 99
DRILL-POINT DRILL, STYLE 8HSLH 100
MULTI-SPUR COUNTERBORE,
STYLE 184 100
SPIRAL PLUG CUTTER,
STYLE 9B 100
BRADPOINT DRILL, STYLE 13L 100
BRADPOINT DRILL, STYLE 13S 101
CARBIDE-TIPPED BRAD POINT DRILL, STYLE 13CT 101
BRADPOINT DRILL, STYLE 19 101
CARBIDE-TIPPED BRAD POINT DRILL, STYLE 19CT 102
CARBIDE-TIPPED BRAD POINT DRILL, STYLE 19CT METRIC 102
BRAD-POINT DRILL, STYLE NO. 19HS 102
BRAD POINT DRILL, 102
STYLE 19HS METRIC 102
BRAD-POINT DRILL, STYLE NO 19HSL 103
TAPERED BRUSH-BLOCK DRILL,
STYLE 19TP 103
BRAD POINT DRILL, STYLE 20 103
BRAD-POINT DRILL,
STYLE 20BHS 103
CARBIDE-TIPPED BRAD-POINT DRILL, STYLE 20BCT 104
BRAD-POINT DRILL,
STYLE NO. 20CT 104
BRAD-POINT DRILL, 104
STYLE 20HS 104
BRAD-POINT DRILL, STYLE 20HS METRIC 105
BRAD-POINT DRILL,
STYLE 20HSLH 105
CARBIDE-TIPPED BRAD POINT DRILL, STYLE 20-6CT 105
BRAD-POINT DRILL
STYLE 20-6 105
BRAD-POINT DRILL,
STYLE 20-6HS 105
GENERAL PURPOSE DRILL, JOBBER LENGTH,
STYLE 29 – 118º POINT 106
GENERAL PURPOSE DRILL, JOBBER LENGTH,
STYLE 29LH – 118º POINT 106
GENERAL PURPOSE DRILL, JOBBER LENGTH, METRIC,
STYLE 29M 107
GENERAL PURPOSE
DRILL SETS, JOBBER LENGTH 107
GENERAL PURPOSE DRILL, SHORT LENGTH, STYLE 29S 107
GENERAL PURPOSE DRILL, SHORT LENGTH, STYLE 29SLH 108
GENERAL PURPOSE DRILL, LONG LENGTH, STYLE 29T 108
GENERAL PURPOSE DRILL, LONG LENGTH, FAST SPIRAL,
STYLE 29TF 109
TAPER-POINT DRILL, JOBBER LENGTH, STYLE 29JTP 109
TAPER-POINT DRILL, TAPER LENGTH, STYLE 29TTP 110
DRILL-POINT 1/2˝ SHANK DRILL,
SILVER & DEMING® • 110
SOLID-CENTER MACHINE 111
AUGER BITS, STYLE NO. 26A • Carbon tool steel 111
AUGER BITS, STYLE NO. 26F 111
POWER POLE AUGER BIT 112
STYLE 26PP • CARBON TOOL STEEL 112
DRILL-POINT DRILL, STYLE 32HS 112
SELF CENTERING DRILL GUIDES (Vix® Bits) 112
REPLACEMENT DRILLS
(VIX® BITS) 112
REPLACEMENT SPRINGS
(VIX® BITS) 112
REPLACEMENT GUIDES
(VIX® BITS) 113
DEPTH COLLARS & SETS 113
CHUCK, STYLE 1 113
FORSTNER® BITS 114
SPADE BITS 115

INSERT BITS

2 FLUTE FLUSH TRIM INSERT BITS 116
1 FLUTE INSERT STRAIGHT BITS 116
2 FLUTE INSERT STRAIGHT BITS 116
2 FLUTE INSERT TEMPLATE BITS 116
1 FLUTE V-GROOVE BIT 116
22 DEGREE BEVEL BITS • 2 FLUTE 117
45 DEGREE BEVEL BITS • 2 FLUTE 117
INSERT COMPRESSION BITS • 2+2 117
45 DEGREE INSERT BIT • 1 FLUTE 117
INSERT SPOILBOARD SURFACING CUTTERS – STRAIGHT
(for MDF and Particleboard) 117
INSERT SPOILBOARD SURFACING CUTTERS – UP-SHEAR
(for Balsa Core Material) 118
INSERT SPOILBOARD SURFACING CUTTERS – ACCESSORIES 118
2 WING COPE (STILE) & STICK (RAIL) BITS – FACE DOWN 118
2 WING COPE (STILE) & STICK (RAIL) BITS –
FACE DOWN – INSERTS 118
2 WING COPE (STILE) & STICK (RAIL) BITS – FACE UP 118
2 WING COPE (STILE) & STICK (RAIL) BITS – FACE UP – INSERTS 119
2 WING RAISED PANEL BITS 119
2 WING RAISED PANEL BITS – INSERTS 119
INSERT 3 WING SHAPER – COPE (STILE) 119
INSERT 3 WING SHAPER – STICK (RAIL) 120
INSERT 3 WING RAISED PANEL CUTTERS 120
INSERT 3 WING BACK PANEL CUTTER 120
INSERT 3 WING RAISED PANEL TRIM CUTTER 121
ACCESSORIES FOR 3 WING CUTTER INSERTS 121

SOLID CARBIDE INSERT REPLACEMENTS AND ACCESSORIES

STANDARD REVERSIBLE INSERT KNIVES – 2 SIDED 1 HOLE 122
STANDARD REVERSIBLE INSERT KNIVES – 4 SIDED 1 HOLE 122
STANDARD REVERSIBLE INSERT KNIVES – 2 SIDED 2 HOLES 123
STANDARD REVERSIBLE INSERT KNIVES – 4 SIDED 2 HOLES
(14 CTC) PLUNGE 123
STANDARD REVERSIBLE INSERT KNIVES – 4 SIDED 2 HOLES
(26 CTC) PLUNGE 123
STANDARD REVERSIBLE INSERT KNIVES – 4 SIDED 3 HOLES
(37 CTC) 124
INSERT KNIVES – END ANGLE 1 HOLE 124
INSERT KNIVES – END ANGLE 2 HOLES (14 CTC) 124
INSERT KNIVES – END ANGLE 2 HOLES (26 CTC) 124
INSERT KNIVES – DOUBLE ANGLE 2 HOLES 124
INSERT KNIVES – 2 SIDED BACK GROOVE 124
INSERT KNIVES – 2 SIDED FACE GROOVE 125
INSERT KNIVES – 4 SIDED FACE GROOVE 125
INSERT KNIVES – 4 SIDED BACK & CROSS GROOVE 125
INSERT KNIVES – Chipbreaker Knives 125
INSERT KNIVES – Radius Knives 125
INSERT KNIVES – Radius Knives 126
INSERT KNIVES – Radius Knives 126
INSERT KNIVES – DOUBLE RADIUS KNIVES (3MM HOLE) 126
INSERT KNIVES – RADIUS PROFILE KNIVES 126
INSERT KNIVES – LEITZ SYSTEMS® FACE GROOVE 126
INSERT KNIVES – PORTABLE PLANERS BACK GROOVE 127
INSERT KNIVES – SCRAPER KNIVES 6 DEGREE 127
INSERT KNIVES – TRIANGLE SPUR KNIVES 127
INSERT KNIVES – SPUR/GROOVING KNIVES 127
INSERT KNIVES – SPUR/GROOVING KNIVES 127
INSERT KNIVES – SPUR/GROOVING KNIVES 128
INSERT KNIVES – SPUR KNIVES 128
INSERT KNIVES – RADIUS KNIVES 128
INSERT KNIVES – V GROOVE KNIVES 128
INSERT KNIVES – LEITZ® SYSTEMS ˝BG – TEST˝ 128
INSERT KNIVES – QUADROMAT, IMA, MFA 129
SPIRAL PLUS MOLDER HEADS 129
SPIRAL PLUS PROFILE SHAPER HEADS 129
SPIRAL PLUS REPLACEMENT PARTS 130
COMPONENT PARTS FOR INSERT TOOLING – INSERTS 130
COMPONENT PARTS FOR INSERT TOOLING – INSERTS FOR END130
COMPONENT PARTS FOR INSERT TOOLING – WRENCHES 130
COMPONENT PARTS FOR INSERT TOOLING – SCREWS 130
HSS 60-16 MOLDER BARS – BEVEL BOTTOM – 5/16˝ THICK 130
HSS 60-16 MOLDER BARS – BEVEL BOTTOM – 1/4˝ THICK 131
HSS 60-16 MOLDER BARS – FLAT BOTTOM – 5/16˝ THICK 131
HSS 60-16 MOLDER BARS – FLAT BOTTOM – 1/4˝ THICK 131
WILLIAM & HUSSEY™ 131
CORRUGATED BACK MOLDER HEADS – 2 KNIFE 132
CORRUGATED BACK MOLDER HEADS – 4 KNIFE 132
CORRUGATED BACK MOLDER HEADS – 6 KNIFE 132

WORKHOLDING FOR CNC
(COLLETS, TOOLHOLDERS AND ACCESSORIES)

SYOZ 20 FOR WOODWORKING MACHINES (RDO20) 134
SYOZ 25 FOR WOODWORKING MACHINES (RDO35) 134
ULTRA HIGH-SPEED COATED CLAMPING NUTS 134
SPANNER WRENCHES – SYOZ 20 and SYOZ 25 135
SHODA® COLLETS (OLD STYLE) 135
SHODA® COLLETS (PIGGY BACK) 135
SHODA® COLLETS (NEW STYLE) 135
SHODA® COLLETS (SUPER SHODA®) 136
SHODA® NUTS 136
ER PRECISION COLLETS – STANDARD SIZES 137
ER PRECISION COLLETS – METRIC SIZES 138
ER PRECISION COLLET SETS 138
TG PRECISION COLLETS 138
HEIAN® COLLETS 139
ER BEARING NUTS 139
ER HIGH SPEED COATED NUTS 139
EASY COLLET REFERENCE SHEET 140
ER SPANNER WRENCHES 140
TOOL HOLDERS FOR CNC ROUTERS 141
ANDI®/WEEKE®/THERMWOOD® CNC CHUCKS 141
BT30 CHUCKS 141
BT35 CHUCKS 142
HSK E COLLET TOOLHOLDERS 142
HSK F COLLET TOOLHOLDERS 142
ER TOOL EXTENDERS 144
AIRPROTM NUT 144
AIRPROTM NUT SPECIFICATIONS 144
ER MINI NUTS 145
ER HIGH-SPEED MINI NUTs 145
PULL STUDS (RETENTION KNOBS) FOR CNC ROUTERS 145
ISO 30 ARBORS 146
HSK 63F ARBORS 146
TIGHTENING STAND FOR ISO, HSK63 & BT30 147

CNC ACCESSORIES

DUST COVERS FOR COLLET NUTS 147
SPINDLE TAPER WIPERS 147
COLLET BRUSHES 148
TORQUE WRENCH 148
TORQUE WRENCH ACCESSORIES 148
RETENTION KNOB SOCKETS 149
FIXED HEAD SQUARE DRIVES 149
CNC ROUTER TABLE PODS 149
MEASURING EQUIPMENT 149

KNIVES

PLANER & JOINTER KNIFE SETS – 1/8˝ THICKNESS 150
PLANER & JOINTER KNIFE SETS – 3/32˝ THICKNESS 151
PLANER & JOINTER KNIFE SETS – 5/32˝ THICKNESS 151
REPLACEMENT KNIVES FOR SYSTEM TERMINUS PLANER HEAD –
HSS 152
REPLACEMENT KNIVES FOR SYSTEM TERMINUS PLANER HEAD –
SOLID CARBIDE 153
REPLACEMENT KNIVES FOR SYSTEM TERSA PLANER HEADS 154
REPLACEMENT KNIVES FOR SYSTEM TERSA
PLANER HEADS – T-1 HSS 155
REPLACEMENT KNIVES FOR WEINING HEADS
SYSTEM CENTROLOCK-HSS 155
REPLACEMENT KNIVES FOR SYSTEM CENTROFIX – HSS 155
REPLACEMENT KNIVES FOR WEINING HEADS
SYSTEM CENTROLOCK – SOLID CARBIDE 156
REPLACEMENT KNIVES FOR SYSTEM CENTROSOLID
CARBIDE 156
Replacement Knives For SuperPac 157

CARBIDE SAW TIPS AND STB STRIPS

STB CARBIDE STRIPS 159
WBC STYLE – SAW TIPS 160
WDC STYLE – SAW TIPS 160
WEC STYLE – SAW TIPS 161
WFC STYLE – SAW TIPS 162
WGC STYLE – SAW TIPS 163
WHC STYLE – SAW TIPS 164
WQC STYLE – SAW TIPS 164
WXC STYLE – SAW TIPS 164
WDC RIGHT STYLE – SAW TIPS 165
WDC LEFT STYLE – SAW TIPS 165
WGC RIGHT STYLE – SAW TIPS 165
WGC LEFT STYLE – SAW TIPS 165
WA STYLE – SAW TIPS 165
WB STYLE – SAW TIPS 166
WC STYLE – SAW TIPS 166
WD STYLE – SAW TIPS 166
WE STYLE – SAW TIPS 167
WF STYLE – SAW TIPS 167
WG STYLE – SAW TIPS 168
WQ STYLE – SAW TIPS 168
WH STYLE – SAW TIPS 169

This site is using SEO Baclinks plugin created by InfoMotru.ro and Locco.Ro