Phone: 407-478-2487 Fax: 407-678-7414 Email: info@advancedrills.com
PO Box 852 * Goldenrod, FL 32733-0852

Rebar Cutter

The Rebar Cutter is an easy method for drilling through embedded rebar and the surrounding concrete. The Rebar Cutter can be used in a 1/2″ drill motor equipped with a 3-Jawed Chuck or directly in the hammer motor utilizing the Rotary Chuck Driver™ adapter. The Rebar Cutter can be used in any 1/2″ capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R. P. M. to 1,200 R. P. M. This includes most combination hammer drills, but when using a combination hammer drill the selector switch must be in the rotary only position! The Rebar Cutter can be used in a Spline Drive Hammer, a SDS MAX ®™ Hammer, or a SDS PLUS ®™ Hammer by utilizing the Rotary Chuck Driver.

Rebar Cutter Masonry / Concrete Drills

ROTARY REBAR CUTTER  – SPECIALTY PRODUCT
  SIZE OAL SHANK WT   SIZE OAL SHANK WT
  LBS   LBS
ROUND SHANK SDS PLUS ® SHANK
ONE PIECE
  3/8″ 12″ 1/2″ 0.6   3/8″ 12″ SDS 0.6
  1/2″ 12″ 1/2″ 0.7   1/2″ 12″ SDS 0.7
  1/2″ 18″ 1/2″ 0.7   1/2″ 18″ SDS 0.7
  9/16″ 12″ 1/2″ 0.85   9/16″ 12″ SDS 0.85
  5/8″ 12″ 1/2″ 1   5/8″ 12″ SDS 1
  5/8″ 18″ 1/2″ 1   5/8″ 18″ SDS 1
  11/16″ 12″ 1/2″ 1.15   11/16″ 12″ SDS 1.15
  3/4″ 12″ 1/2″ 1.3   3/4″ 12″ SDS 1.3
  3/4″ 18″ 1/2″ 1.3   3/4″ 18″ SDS 1.3
  3/4″ 24″ 1/2″ 1.3   3/4″ 24″ SDS 1.3
  13/16″ 12″ 1/2″ 1.3   13/16″ 12″ SDS 1.3
  7/8″ 12″ 1/2″ 1.75   7/8″ 12″ SDS 1.75
  1″ 12″ 1/2″ 2.35   1″ 12″ SDS 2.35
  1-1/8″ 12″ 1/2″ 2.6   1-1/8″ 12″ SDS 2.6
  1-1/4″ 12″ 1/2″ 3.15   1-1/4″ 12″ SDS 3.15
TWO PIECE
  1-3/8″ 12″ 1/2″ 3.75   1-3/8″ 12″ 1/2″ 3.75
  1-1/2″ 12″ 1/2″ 4.2   1-1/2″ 12″ 1/2″ 4.2
  1-3/4″ 12″ 1/2″ 4.65   1-3/4″ 12″ 1/2″ 4.65
  2″ 12″ 1/2″ 5.1   2″ 12″ 1/2″ 5.1
  2-1/2″ 12″ 1/2″ 5.4   2-1/2″ 12″ 1/2″ 5.4
  3″ 12″ 1/2″ 6.9   3″ 12″ 1/2″ 6.9
SHANKS – REBAR CUTTER
  THREAD OAL SHANK WT   THREAD OAL SHANK WT
  LBS   LBS
  3/4″-10 6″ 1/2″ 0.65   3/4″-10 12″ 1/2″ 0.7

 

If at any time you have questions, need special drill bits or tooling or you are unsure about the proper tooling for the job.  Our staff will assist you with the proper drills and tooling, and its proper use, and help resolve problems. Just all the highest American Made quality drill bits and tooling at the lowest prices.

Customer Service:

Phone: (407) 478-2487

Fax: (407) 678-7414

Custom and Standard Tooling, for all Applications Large or Small. Specialists for Specific Needs Drill Bits or all other Tooling.

Monday – Friday 9:00 am to 5:00 pm EST

 

capture

 
Not all tooling is listed on this website. We are working hard to provide all of the products that we carry. If you do not see what you are looking for please call 407-478-2487 or send us an email to info@advancedrills.com
 
 
Pictures, Features, and Specifications Advance Drills Inc. has made every effort to provide accurate pictures, features, and specifications for your information. We do not, however, imply or express a warranty that the products are exactly as depicted and photos within our site. We do reserve the right to make changes in design, appearance, and construction of any and all products listed herein without incurring any obligation in making such changes in products previously sold or transferred. Advance Drills Inc. reserves the right to discontinue the availability of any products at such time as such action is considered necessary.